Modem που υποστηριζει αναγνωριση κλησης...

[nino]

Δεν γνωριζω ποια Modem υποστηριζουν αναγνωριση κλησης με pstn γραμμη...

Εχω την εντυπωση πως το κανουν το V92 αλλα δεν ειμαι σιγουρος πως ενα V92 υποστηριζει απαραιτητα αναγνωριση κλησης.Επειδη θελω να αγορασω ενα θα ηθελα γνωμες.

[plpapadopoulos]

Yparxei ena megalo koumpaki pou legetai "ΑΝΑΖΗΤΗΣΗ"... Patwntas loipon to koumpak iayto, 8a vreis o,ti 8eleis. Paromoia topics exoun syzhth8ei ki anoixtei 2 fores sigoura thn prohgoumenh evdomada.

 

Ena modem PSTN pou yposthrizei anagnwrish klhshs einai to US Robotics 5630B (External Serial 56K PSTN). To exw kai sto eggywmai apolyta oti yposthrizei!

[nino]

Yparxei ena megalo koumpaki pou legetai "ΑΝΑΖΗΤΗΣΗ"... Patwntas loipon to koumpak iayto' date=' 8a vreis o,ti 8eleis. Paromoia topics exoun syzhth8ei ki anoixtei 2 fores sigoura thn prohgoumenh evdomada.

 

Ena modem PSTN pou yposthrizei anagnwrish klhshs einai to US Robotics 5630B (External Serial 56K PSTN). To exw kai sto eggywmai apolyta oti yposthrizei![/quote']

Φιλε μου δεν με ενδιαφερει ενα συγκεκριμενο μοντελο ,για το λογο αυτο το μεγαλο κουμπακι δεν με ικανοποιησε.Με ενδιαφερει να μαθω αν υπαρχει καποιο χαρακτηριστικο ή λειτουργια που προυποθετει την υποστηριξη της αναγνωρισης κλησης.

Σε ευχαριστω για το ενδιαφερον.

[dtkos]

If Audio Caller ID is not reporting caller ID information, your modem's caller ID feature may not be turned on, or your modem may not support caller ID. If your modem does support caller ID, but it is just not enabled, then this is a sign you are using the wrong modem driver, or there is a bug in your modem driver. Before trying the following, please check with your modem manufacturer for an updated driver.

To manually enable the caller ID feature of your modem you must first determine the command to enable this feature. If you have documentation for your modem this should provide you with the command. If you do not have documentation you can experiment with the most common commands to see which one will work with your modem. Follow these steps to determine the caller ID enable command for your modem and to check if your modem supports caller ID:

 

 

Start HyperTerminal (Start / Programs / Accessories / Communcations / HyperTerminal).

Click "Cancel" to the "Connection Description" dialog that comes up.

Select "File/Properties..." and make sure you have selected your modem under "Connect using:". Click OK.

Type "AT" (without the double quotes) and then press the Enter key. You should get a response of "OK" from your modem. (You may not see the "AT" characters echoed back in the HyperTerminal display. This is okay, as long as you see the "OK" when you press the Enter key.)

If you know your modem's caller ID enable command, enter it now. If you don't, you can start experimenting. Common enable commands are shown here:

AT#CID=1

AT#CC1

AT+VCID=1

AT%CCID=1

AT*ID1

 

Type each of the above in one at a time. After typing in each one you should either get an OK or ERROR returned from your modem. If you get an ERROR try the next one. If you get an OK go on to step #6. If you never get an OK and you've tried all of these then your modem most likely does not support caller ID.

 

Now that you've enabled the caller ID feature on your modem it is time to test it out. Have someone give you a call and watch what information your modem outputs to HyperTerminal. If your modem supports caller ID and you've successfully enabled it, you should see something like this:

RING

 

DATE = 0720

TIME = 2351

NAME = BEILEY SOFTWARE

NMBR = 4807050129

 

RING

 

RING

 

If your modem is not supporting caller ID or it isn't enabled, you will see something like this:

 

RING

 

RING

 

RING

 

You should see the caller ID information come in between the first and second rings as shown in the first example if your modem is enabled and properly supporting caller ID.

[nino]

Φιλε μου παρα πολυ καλο ΕΓΡΑΨΕΣ....Μενει δοκιμη (την Τριτη).

Σε ευχαριστω..

[plpapadopoulos]

dtkos eisai arxhgos, ayto 8a einai xrhsimo gia pollous Eyge!