Καταληξη *.iso???

[Liquid]

Τι ρολο παιζει αυτη η καταληξη και πως εκτελειται?

[JPG]

Ta arxeia .iso einai image arxeia gia CD. Me kapio programma egrafis paradeigma EasyCD creator epilegeis Burn from CD image kai sou dimiourgei ena CD-rom.

[Melven]

nai einai image enos cd,periexei olokliro to programa xoris ka8olou perikopes,tora mallon pianei ligotero xoro kai einai ena mono arxeio opote gia ayto to xrisimopoioun ayto.kalo programa einai to cdrwin gia iso burning.

[gmeles]

Τώρα αν θες να δεις τι υπάρχει σε αυτό το αρχείο αλλά δεν θες ή δεν μπορείς να το κάψεις σε cd υπάρχει το isobuster ένα πολύ καλό προγραμματάκι που σου επιτρέπει να δεις οως θα ήταν το .iso μέσα στο cd και να το εκτελέσεις κανονικά. Αυτά

[seven]

Symfono me olous tous parapano, alla des ligo to kainourio nero burning 5.5.2.4!!!Apla grafeis to cd epilegontas "burn image".Opos katalabes eimai fanatikos tou nero,an se endiaferei h asfaleia antigrafhs.

[spock]

Φίλε μου, η λύση είναι απλή, και προέρχεται απο το ίδιο το site της Ahead : <BR>Proceed as follows:<P><BR>Start Nero<P>Choose the menu command "File"->"Burn CD image"<P>Choose as file type: all files (*.*)<P>Select the ISO image file <P>Now you will see a dialog, asking you, if you want to supply detailled<BR>image parameters. This is necessary, since Nero needs to know<BR>exactly, what format the image file has to be able to burn it correctly.<P>Enter the following parameters:<BR>- Mode 1 (assuming, that you created a mode 1 image)<BR>- 2048 bytes per sector (corresponds to a mode 1 sector)<BR>- 0 bytes header and trailer (assuming, the image contains<BR>only "pure" ISO data and no other special header<BR>or trailer)<BR>- no swapping or scrambling (assuming, that the file contains<BR>bytes in the correct order to be written without word swapping)<P>Click on "burn" and (for safety considerations) use an empty cdr.<P><BR>This procedures relies upon the assumption, that you have a<BR>"normal" ISO mode 1 image file. You can check this, by opening the<BR>image with a hex editor (maybe UltraEdit, because this prog doesn't<BR>try to read the entire image into memory (after setting the<BR>read-only flag) and look at offset 8000 hex<BR>(this corresponds to sector 16, where the ISO [p]rimary [v]olume<BR>[d]descriptor is stored on cd). If you see some text like "CD001"<BR>(the PVD magic), then burning with the above procedure should work<BR>fine. <P>Αυτά τα ολίγα... καλά "καψίματα"...<P><BR><B>Live long and prosper...</B>

[-nick-]

To IsoBUster tha to breite kai ston Pathfinder tou Petza...