win xp

[internet_gr]

eixa valei ta win xp gr pro kai simera xafnika den xekinousan!! ta xanaegatestisa kai ego kai tora otan anoigo to pc me rotaei poies apo tis 2 egatastaseis thelo.. xerei kaneis na mou pei pos tha sviso tin palia na min uparxei katholou?? kai kati alo, ginete na exo win xp kai 98 mazi??

[spinmind]

Σε πόσα partιtion έχεις χωρίσει το δίσκο σου; Τα ΧΡ τη δεύτερη φορά τα εγκατέστησες στο ίδιο ή σε διαφορετικό partition; Όπως και να έχει το πράμα καλύτερα να κάνεις format και να τα ξαναπεράσεις για να μην έχεις πρόβλημα.

Γίνεται να έχεις και 98 και ΧΡ αλλά σε διαφορετικά partition (διαφορετικό filesystem γαρ) και θα πρέπει να εγκαταστήσεις πρώτα τα 98 και μετά τα ΧΡ αλλιώς δε θα βλέπει τα 98 ο boot manager των XP.

[internet_gr]

sto idio einai!! pos xorizeis ton disko ??

[ex_tep]

fisika kai ginete.Prota tha egatastiseis sto C ta 98 kai meta sto deutero partition ta XP.Den ginete ta 98 apo so gnorizo na vriskonte se allo partition ektos tou C.

[spinmind]

Μπορείς να χρησιμοπιήσεις το Partition Magic που σου δίνει πληροφορίες για τα partitions και κάνει split αν θέλεις.Αν είσαι παλιός στην πιάτσα (χεχε) θα σου πρότεινα να χρησιμοποιήσεις ένα όχι ιδιαίτερα δύσκολο DOS utility,το fdisk, να φτιάξεις τα Partitions όπως τα θέλεις, να εγκαταστήσεις 98 που πάνε αναγκαστικά στο C και να συνεχίσεις με ΧΡ.Βέβαια με το fdisk θα δημιουργήσεις fat32 partitions.Δεν παίζει ρόλο όμως γιατι τα ΧΡ κατά την εγκατάσταση σε ρωτάνε αν θέλεις να χρησιμοποιήσεις NTFS ή FAT32.

[internet_gr]

epidi den eimai kai poli kalos tha arkesto sta xp :)

[opstic]

koita ama entelei apofaseis na to kaneis i lisi einai mia tharalea alla paizei ftiaxeis mia boot dikseta gia win98 pou mporeis na tin katevaseis kiolas to software kai apo http://www.bootdisk.com/ meta trekstina se mia disketa meta kane boot apo tin disketa kai kane install to win98 sto proto partion pou tha kaneis exei simasia kai sto deytero ta XP einai paneukolo dokimase den xaneis kai an exeis kamia aporia mas les

[sakis76]

Egw eixa ta XP kai epeidh den yparxoun drivers gia to scanner kai to tv tuner, ithela na valo kai ta 98, xoris omos na kano format klp.

 

Kai me ena sxetiko search (sto Google) vrika pos ginetai.

 

copy apo:http://www.dougknox.com/xp/tips/xp_repair_9x.htm

 

How do I install Windows? 98/Me after I've installed XP?

(without 3rd party software)

I DO NOT provide any support for these procedures, via e-mail or the newsgroups.

 

Necessary Criteria

 

This procedure assumes that Windows XP is installed on drive C: No support is offered for other drive letters.

Drive C: must be FAT16 or FAT32 to be able to install Windows 98/Me after XP is already installed. The 98/Me installation routine cannot write to an NTFS partition.

You must have a second hard disk or partition formatted for FAT16/32 in order to be able to install Windows 98/Me. Installing 98/Me to the same partition as Windows XP is NOT RECOMMENDED!

I recommend the use of a Windows 98/Me Startup disk for this procedure. If you don't have one, you can download the necessary files from http://www.bootdisk.com You should ensure that DEBUG.EXE is on your Startup disk. If it isn't, it can be copied from the Windows\Command folder. On a 98/Me Startup disk, created from Add/Remove Programs, its in the EBD.CAB file on the Startup disk. For a 98 Startup disk created from FAT32EBD.EXE its on the floppy

 

Installing Windows? 98

 

1) Use a Win98/Me Startup disk (with CD support) to boot your computer.

2) Insert your Win98/Me CD into the CD Rom drive.

3) At the A: prompt type X:\Win98\Setup.exe (for Win98) or X:\Win9x\Setup.exe (for Win Me) where X: is your CD-ROM drive.

4) Proceed with the install. When prompted for the install location, you'll see C:\Windows.000. Choose Other directory and change this to the drive you wish to install 98/Me to and name the folder Windows (or something else if you prefer).

5) Complete the Win98/Me install. Allow the computer to boot into Win98/Me.

 

Repairing the Windows? XP Boot Loader

 

1) Create a Win98/Me Startup Disk

2) Create a Notepad file with the following entries, exactly as shown:

 

L 100 2 0 1

N C:\BOOTSECT.DOS

R BX

0

R CX

200

W

Q

 

3) Save the file to the Win98/Me Startup Disk as READ.SCR

4) Boot the computer with the Win98/Me Startup Disk and at the A: prompt type

 

DEBUG <READ.SCR

 

Steps 1 - 4 create the BOOTSECT.DOS file needed to boot Win98/Me. For your convenience, you can download READ.SCR here. I suggest you use right click and Save As. You may need to use the ATTRIB C:\BOOTSECT.DOS -S -H -R command if BOOTSECT.DOS already exists and you get an error when trying to recreate it.

 

5) Configure your computer to boot from the CD drive. This is done in the BIOS, or your computer may offer the option at startup if it detects a bootable CD. Consult your computer's manual for more information. If your computer does not support booting from CD-Rom, you should also be able to boot with a 98/Me Startup disk, and run WINNT.EXE from the I386 folder of your XP CD.

6) Insert your XP CD and boot from it.

7) You'll see some files being copied, then you'll be presented with a choice of installing or

repairing an existing installation. Choose Repair.

8) You'll be asked which XP installation you want to log into. Enter 1. There is usually only

one installation.

9) You'll be prompted for the Administrator password. For Home, the default password is blank, so just hit Enter. For Pro, enter the same password you did during setup for the Administrator account (this is not the same as the password for an Admin level account. It must be the Administrator account password).

10) At the C:\Windows prompt, type FIXBOOT. You'll be prompted to confirm. Do so.

11) When FIXBOOT is finished, remove the XP CD and type EXIT and the machine will reboot.

Reconfigure your computer to boot from the hard drive if necessary.

 

You will now get the XP Boot loader with your choice of operating systems.

 

 

Se emena doulepse apsoga. ta Xp ston C: kai ta 98 ston E: